1. <center id="ivk13"><label id="ivk13"><kbd id="ivk13"></kbd></label></center>

        <ins id="ivk13"><rt id="ivk13"></rt></ins>
          <nobr id="ivk13"></nobr>
      2. <thead id="ivk13"></thead>
      3. <progress id="ivk13"></progress><progress id="ivk13"></progress>
        <samp id="ivk13"></samp>

          <center id="ivk13"></center>

            Key: Case Erectors,case former,tray erector,carton former,carton erector,tray former

            Case erectors is used to erect, pack, seal, or unpack cases of products. In most instances, case equipment is used to form cardboard boxes; however, corrugated materials and plastics formers are also available. Types of case equipment include case erectors, case cartoners, carton packers, carton sealers, and unpackers.

            Case erectors and case cartoners are case equipment which automatically forms corrugated cases. A stack of corrugated blanks are knocked down and placed into the machine. The blanks are pulled out of the machine one-by-one and formed into cases. The newly formed cases are sealed at the bottom with tape or glue.

            Case Erectors Total:9products
            CF-30TX Case Erectors
            Model CF-30TX
            Power supply 3P 380V 50HZ,1.5 kW
            Air supply0.5 MPa~0.6 MPa
            Air consumption30m3/h
            Worktable height 1060mm(Suitable for manual operation height)
            Case erector methodMin:250*150*190mm, max:550*390*400mm
            Working Speed≤28cases/min
            carton size Min:250*150*190mm, max:550*390*400mm
            Tape Bopp or draft paper tape
            Current protection IP54
            Environment condition Humidity ≤98%, Temperature -10℃~40℃
            Machine weight 1100kg
            Machine size:LXWXH 2903×1420×1932mm;
            Note: In order to reduce the damage rate of cartons and improve the shaping case speed, it is recommended to use good quality cartons.
            Inquiry this product
            CF-10T Case Erectors
            Model CF-10T
            Air Pressure 4kg/cm2
            Case Size L200-600mm,W185-480mm,H120-480mm(The height is the standard sealing height of carton sealer machine)
            Erecting type Fold bottom covers of carton and can be used as the platform for packing products
            Electric adoptions AIRTAC cylinder,"AIRTAC" Regulator valve,"AIRTAC" Pneumatic control valve,"Festo" Air time-delay commutator
            Worktable height Stand: 600~780mm(adjustable) Castor wheel:700~880mm(adjustable)
            Outside dimension L1500 X W900 X H780mm(Stand)/880mm(Castor wheel)
            Machine weight 80kg
            Inquiry this product
            CF-20T Case Erectors
            Alarm when lack tape or case
            Model CF-20T
            Power supply 220V 50Hz,500W(optional)
            Air Pressure 6kg/cm2
            Tape Width 4.8-6.0cm
            Working Speed 0-10cases/min
            Case Size L290-530mm, W180-285mm(base carton size must be suitable as below:630>W/2+H>280 L change scope 150mm)
            Machine appearance L2050mm x W2200mm x H1350mm
            Machine weight 400kg
            Environment conditions Humidity≤98% Temperature 0-40℃
            Inquiry this product
            CF-20TX Case Erectors
            Alarm when lack tape or case
            Model CF-20TX
            Power supply 220V 50Hz,500W(optional)
            Air Pressure 6kg/cm2
            Tape Width 4.8-6.0cm
            Working Speed 0-12cases/min
            Case Size L330-530mm, W165-330mm(base carton size must be suitable as below:570>W/2+H>330 L change scope 150mm)
            Machine appearance L2005mm x W1950mm x H1285mm
            Machine weight 400kg
            Environment conditions Humidity≤98% Temperature 0-40℃
            Inquiry this product
            CF-20TN Case Erectors
            Alarm when lack tape or case
            Model CF-20TN
            Power supply 3P/380V 50Hz,1140W(optional)
            Air Pressure 6kg/cm2
            Tape Width 4.8-6.0cm
            Working Speed 0-18cases/min
            Case Size L300-480mm, W165-330mm(base carton size must be suitable as below:550>W/2+H>280 L change scope 150mm)
            Machine appearance L2520mm x W1900mm x H1510mm
            Machine weight 600kg
            Environment conditions Humidity≤98% Temperature 0-40℃
            Inquiry this product
            CF-30T Case Erectors
            Alarm when lack tape or case
            Model CF-30T
            Power supply 380V 50Hz 1.8KW
            Air pressure 6kg/cm2
            Tape width 4.8-7.2cm tape max.Length 2km
            Working speed 20-25cases/min work height 1120+-50mm
            Case Size 250
            Machine appearance dimensions L 2800mm x W 1560mm x H2250mm
            Machine weight 1100kg
            Environment conditions Humidity≤98% TEmperature 0-40℃
            Optional with "Nordson" hot glue machine
            Inquiry this product
            CF-30TB Case Erectors
            Alarm when lack tape or case
            Model CF-30T
            Power supply 380V 50Hz 1.8KW
            Air pressure 6kg/cm2
            Tape width 4.8-7.2cm tape max.Length 2km
            Working speed 20-25cases/min work height 1120+-50mm
            Case Size 250
            Machine appearance dimensions L 4800mm x W 1560mm x H2250mm
            Machine weight 1100kg
            Environment conditions Humidity≤98% TEmperature 0-40℃
            Optional with "Nordson" hot glue machine
            Inquiry this product
            CF-40T Case Erectors(BOPP or Kraft paper tape type)
            Alarm when lack tape or case
            Model CF-40T
            Power supply 380V ± 10%/50Hz /2.5KW(Three-phase four-wire system)
            Air pressure 4-6kg/cm2
            Working speed 40cases/min
            Case Size Custom-made
            Sealing specification Custom-made
            Sealing type Kraft paper or BOPP tape
            Electric adoptions Adopt TAIWAN "CPG" or "ONG LI" motor
            Worktable height 1000-1100mm
            Outside dimension L4150 x W1530 x H2000mm
            Transport packing size L4250 x W1630 x H2100mm(14.55m3)
            Machine weight 650kg
            Inquiry this product
            CF-40T-H Case Erectors(hot glue type)
            Alarm when lack tape or case
            Model CF-40T-H
            Power supply 380V ± 10%/50Hz /2.5KW(Three-phase four-wire system)
            Air pressure 4-6kg/cm2
            Tape width 4.8-7.2cm tape max.Length 2km
            Working speed 20~60cases/min
            Case Size Custom-made
            Sealing specification Custom-made
            Sealing type Hot glue
            Outside dimension L4250 x W2000 x H1700mm
            Electric adoptions Adopt TAIWAN "CPG" or "DONG LI" motor.
            Worktable height 1000mm
            Machine weight 1000kg
            Inquiry this product
            Quick Links: Packing Machine  Case Erectors  Labeling Machine  Shrink Wrapper  Carton Sealer  Strapping Machine  Strapping Tool  Palletizer  Wrapping Machine  Carton Packer  Packing line  PP Straps  LLDPE Stretch Film Conveyor   Filling and Capping Machine   Vacuum Packaging Machine  Robot  Vertical Packaging Machine
            久久不见久久见免费影院|国产精品无码一区二区久|无码国产激情精品久久久久|精品人妻码一区二区三区 一区二区三区四区芒果|无码毛片一区二区三区入口|国产精品精品一区二区三区麻豆|久久久久狠狠色精品 国产AⅤ一区二区三区精品|99久久久码国产精品性| 国产高清一区二区三区直播|久久夜色精品国产AV无码 日韩无码一区二区三区|99无码不卡中文字幕在线视频|国产一区二区三区AV网站|中日韩国产大陆欧美视频
                1. <center id="ivk13"><label id="ivk13"><kbd id="ivk13"></kbd></label></center>

                  <ins id="ivk13"><rt id="ivk13"></rt></ins>
                    <nobr id="ivk13"></nobr>
                2. <thead id="ivk13"></thead>
                3. <progress id="ivk13"></progress><progress id="ivk13"></progress>
                  <samp id="ivk13"></samp>

                    <center id="ivk13"></center>